ELEHYD europlus Tandem-Series

CNC Synchro Tandem Press Brake
> 400 Ton

SIDDHAPURA’s CNC Tandem Press Brakes are designed and developed through years of experience in sheet metal working machineries. Our Hydraulic Press Brakes are developed using the latest technologies. They are widely accepted in industries for continuous production runs and in areas requiring accuracy and repeatability coupled with high production.

FEATURES

Ergonomic user friendly Pendant & Mobile Control Operating Console with Cybelec/Delem CNC Operating System.
High quality and repetitive bending is obtained by using of Hydro-Electrical Technique with Synchronized Working Cylinders VI, 12 & Servo Valves, these will give you the best bending result with its perfect repeatability ratio.
CNC Operated Analog Dynamic & Fast Servo Controlled Precision Backgauge system with strong construction ensures an efficient operation for X, R & Z-Axis with Servo Motor, HIWIN OR Equitant Ball Screws & Linear Guide System with an accuracy of 0.01.
Synchronization control of YI+Y2 axis provided by linear encoders within 0.01 mm tolerances.
CNC Dynamic-Hydraulic Anti Deflection System can automatically control the table deflection compensation yielding uniform length of all work piece angles that communicates with the CNC Controller, performs crowning automatically and ensuring that the bended part is at every point and at equal bend angles.
SIDDHAPURA/IMPORTED Top and Bottom Tool are long lasting stiffened and provide precise bending.
Quick Release Promecam type Top Tool Clamping System which provides easy to change & fastest quick tool change operationally by single lever operated.
Sliding Front Sheet Support Arms with the help of linear guide rail and bearing.
BOSCH-REXROTH/HOERBIGER servo hydraulic system with proportional valve & Silent high pressure pump.
Covers for Cylinders, Top Beam & Side Guards.
All SIDDHAPURA machines are designed using 2D & 3D programming and made with enhanced high tensile 152062 quality steel with the latest high-frequency with modern aesthetic concept responding hydraulic control technology.
Front Cylinders design with PU imported Seals.
Cylinders are machined with 0.001 mm precision and pistons are especially hard chrome.
Electrical Panel with cooling system designed to meet CE standards.
6 Axis Back gauge (X1, X2, R1, R2, 21, 22)
Cybelec/Delem delegated 2D & 3D controller with offline software available on request.
Special Tooling available.
Throat Depth > 400 mm (Upto 800 mm)
Day Light > 560 mm (Upto 1300 mm)
Stroke Length > 375 mm (Upto 800 mm)
Bending Length > 4000 mm (Upto 1620 mm)
High Speed (Rapid/Working/Return Speeds)

AVAILABLE

Single – Length: 4000 to 14200 mm | Capacity: 400 to 1500 Ton
Tandem – Length: 4000 to 32400 mm | Capacity: 400 to 12000 Ton

ELEHYD europlus Tandem-Series

Ready to pull a trigger? Contact us today.

PRODUCTS

PAGES

CORPORATE OFFICE

FACTORY & REGISTERED OFFICE

SOCIAL

CONTACT INFO